Plant - CPCS Courses

At the end of your CPCS A77 Telehandler 360 Slew Course you will be able to:

• Complete all manufacturer’ pre-start and running checks and prepare the excavator for travel
• Prepare and set the telehandler for each lift. Fit the relevant attachment.
• Lift load & place at ground level at an indicated point using full reach (horizontal) of the telehandler.
• Lift load & reverse in a straight line for at least 20m, passing through a restriction at the end of the run.
• Place load onto the vehicle bed. Lift load at max radius and slew through 200° & land load within 2m of machines max radius.
• Lift load & simulate a concrete pouring exercise by traveling the load in a straight line (min 6m) and land load at given place.
• Travel up & down the slope, over rough terrain & pass through a chicane. Stop & restart on incline (loaded).
• High lift & retrieve load. Lorry loading & unloading. Stack 3 loads vertically & de-stack.
• Lift & place load at a given point below ground level or behind a structure. Create stack at a given location.
• Lift load from min to max radius in relation to load. Lift load & reverse for 10m and pass through a restriction.
• Position machine so that stabiliser footprint is 2m from base of tower & lift load (75% radius), slew 90° & place on tower.
• Remove the hook/hoist rope & return the machine ready for fork-use. Park the machine & carry out shut-down & securing procedures.

The CPCS A77 Telehandler 360 Slew course consists of two key parts, practical and theory. You’ll spend a day learning the related theory, 3 days practicing the practical elements followed by a final day of assessment (for both theory and practical).